A screw machine shop and screw machine products manufacturers directory including screw machine product, Swiss screw machine, turned parts, screw machine parts, high precision screw machine products, automatic screw machine, screw machine part, precision medical components, medical screw machine products and Swiss screw machine parts.  

Information Page Links:

Featured Screw Machine Product Manufacturers

About Screw Machine Products

Screw Machine Product Terms

Screw Machine Product Associations

Screw Machine Product Resources

Trade Shows

Featured Screw Machine Product Articles

More Articles

ISO - International Organization
for Standardization

Back

About Screw Machine Products

Screw machine products are turned parts created in high volumes on a screw machine. Basically, a screw machine, its cutting methods like a highly automated lathe, turns/faces the rod of material, parts it off and advances the rod for the next part. Bar stock is gripped by a spindle’s spring collet, which rotates the stock. The automatic movement, depth and duration of all cuts are controlled by cams. The turret automatically positions each tool. Lever-operated cross slides carry the tools at right angles to the spindle. The main drive shaft of a screw machine provides power to the machine bed’s lead work shaft and controls the two front cam shafts. The machine motor, located at the base of the machine, is the central power source for all operations and will vary in horsepower, depending on the size of the machine, speed and stock to be machined. Screw machines are equipped with a mechanical safety clutch that will disengage to stop the main drive shaft, in the event of overloading or jamming, in order to protect the operating mechanisms.

Automatic screw machines can be single- or multi-spindled. The Swiss screw machine, so named because it originated in Switzerland, feeds the bar stock through the cutting cycle. Another type of single-spindled machine rotates the work in a fixed position, which is typically heavier than that produced by Swiss screw machines. Multi-spindled screw machines can handle from four to twelve bars at a time. The stacked type is like four machines in one, as it can produce four complete pieces during one machining cycle. The spindles of an indexing type multi-spindled screw machine progressively cut the bar stock, making no identical cuts. The multiple-spindle chucking machine is similar to that of a multi-spindled automatic screw machine, except it is semi-automatic. Instead of bar stock, these machines are used for castings or forgings.

Screw machine product manufacturers provide integral components of a variety of products in the automotive, agricultural, medical, electronic and recreational industries. Screw machine products are used to form turned parts for numerous computer products, hardware and tools, lawn and garden equipment and an endless array of other industrial products. Turned parts include fittings, screws, bolts, pins, rivets, fasteners, studs and bushings. Cost effectiveness, rapid production and close tolerances for large volumes of parts are a few advantages of screw machine product manufacturers. In addition, a wide variety of metals can be turned, including stainless steel, brass, titanium and aluminum. Certain plastics can also be used in the production of screw machine parts.

When selecting screw machine product manufacturers, it is important to determine production needs. The type of material is a factor, as certain materials (e.g. steel) require more power than others, such as aluminum. The greater the desired spindle speed, the higher the horsepower required. Typically, a machine with maximum flexibility will cover all needs, depending on the range of work that is done in-house. However, if floor space is limited, attachments may be added to change a screw machine into a fully-automatic, multi-phase machine. These attachments help to economize space and to reduce the cost of per unit of output.

Images Provided by H&R Screw Machine Products, Inc.

Featured Articles

“Industry Profile: Waste Reduction in Screw Machine Operations”
http://www.p2pays.org/ref/03/02946.pdf

“How to Buy Automatic Screw Machines”
http://www.equipmentmls.com/info/howtobuy-automaticscrewmachines.html

Types of Screw Machine Products

• Automatic screw machine parts are complex parts that are often cylindrical and/or threaded. Automatic screw machines produce these parts at high speeds.
  
• High precision screw machine products are produced to extremely close tolerances, which is particularly useful when producing large volumes of turned parts. Close tolerances are achieved through the use of high-grade metals and close inspections during production stages.
  
• Medical screw machine products are used in a variety of applications in the medical, scientific and pharmaceutical industries. Precision medical components include spinal implants, screws and dental implants.
  
• Screw machine parts are usually cylindrical and threaded products.
  
• Screw machine products are manufactured by screw machines.
  
• Screw machining is a manufacturing process that can turn out several identical products at the same time.
  
• Stainless steel screw machine parts provide superior corrosion and chemical resistance. Stainless steel screw machine products are useful in industrial applications in which they will be exposed to temperature extremes, moisture and chemicals.
  
• Swiss screw machine parts are produced to very close tolerances. Swiss screw machines are often used in the production of small, complex parts.
  
• Threaded rod is a fastening bar with a twisted grove along its length.
  
• Turned parts are parts with extremely tight tolerances that are formed by loading bar stock into a screw machine and then machining the parts as the bar is fed through the machine. The vast majority of turned parts are formed by this process.